Technical parameters:
| model |
thrust |
speed |
push distance |
motor model |
| DTI-63-200 |
63KG |
76 |
20CM |
JW5612 |
Product:
Introduction:
The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs
reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload
protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,
chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,
with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient
installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of
hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in
the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.
Our company produced the DT type, HDG series of electric putt (electric cylinder). Push (pull) force from
0.25KN to 50KN; push and pull stroke speed were 25mm / s, 42mm / s, 84mm / s. Is a smooth and accurate
action, reliable performance, and has built-in overload protection of the mechanical rotation device. In a very
wide range of areas can replace or replace the cylinder, the cylinder, especially in high temperature, fire,
explosion-proof, pollution-free environmental conditions, is an indispensable supporting equipment.
The series, the specifications of the push and pull stroke size or speed (0-100mm / s) can be selected by the
user.
To facilitate automatic control or to achieve a special trajectory, according to user requirements, can be
configured DC, frequency, step, speed and other special motor to meet the total control requirements.
Products are widely used in electricity, machinery, metallurgy, transportation, coal, chemicals, food processing
and other departments.
Technical specification:
| NO. |
Type |
Trust
(kg) |
Route
(mm) |
Speed
(mm/s) |
Motor |
380(V) |
Le(mm) |
contour dimension
(L*W*H)mm |
weight
(kg) |
| Type |
Power
(w) |
Revolution
(T/Min) |
Electricity
(A) |
LeMin |
LeMax |
| 1 |
25-20-I |
25 |
200 |
48 |
AO25024 |
40 |
1400 |
0.23 |
369 |
569 |
580*125*118 |
7.5 |
| 2 |
25-20-II |
25 |
200 |
96 |
AO25022 |
60 |
2800 |
0.23 |
369 |
569 |
580*125*118 |
7.5 |
| 3 |
100-40-I |
100 |
400 |
42 |
AO5624 |
120 |
1400 |
0.47 |
640 |
1040 |
858*152*206 |
23 |
| 4 |
100-40-II |
100 |
400 |
84 |
AO5622 |
180 |
2800 |
0.52 |
640 |
1040 |
858*152*206 |
23 |
| 5 |
300-50-I |
300 |
500 |
42 |
AO6334 |
370 |
1400 |
1.12 |
745 |
1245 |
998*170*226 |
35 |
| 6 |
300-50-II |
300 |
500 |
84 |
AO6332 |
550 |
2800 |
1.38 |
745 |
1245 |
998*170*226 |
35 |
| 7 |
500-50-I |
500 |
500 |
50 |
AO7134 |
750 |
1400 |
2.02 |
778 |
1278 |
1098*190*226.5 |
52 |
| 8 |
500-50-II |
500 |
500 |
100 |
AO7132 |
1100 |
2800 |
2.6 |
778 |
1278 |
1098*190*226.5 |
52 |
| 9 |
700-60-I |
700 |
600 |
50 |
AO7134 |
750 |
1400 |
2.02 |
803 |
1343 |
1193*200*279 |
63 |
| 10 |
700-60-II |
700 |
600 |
100 |
AO7132 |
1100 |
2800 |
2.6 |
803 |
1343 |
1193*200*279 |
63 |
| 11 |
1000-60-I |
1000 |
600 |
50 |
JO2-21-4 |
1100 |
1400 |
2.68 |
883 |
1483 |
1260*204*271 |
75 |
| 12 |
1000-60-II |
1000 |
600 |
100 |
JO2-21-2 |
1500 |
2860 |
3.24 |
883 |
1483 |
1260*204*271 |
75 |
| 13 |
1600-80-I |
1600 |
800 |
50 |
JO2-31-4 |
2200 |
1400 |
4.9 |
1063 |
1863 |
1535*302*330 |
|
| 14 |
1600-80-II |
1600 |
800 |
100 |
JO2-31-2 |
3000 |
2860 |
8.06 |
1063 |
1863 |
1535*302*330 |
|
1, Base 2, Coupling 3, Pump base 4, Pump 5, Fuel tank 6, Manifold block 7, Inspection mouth 8, Air filter 9,
Cylinder base 10, Throttle valve 11, Locking circle nut 12 Cold 13 live cold ring 14, cylinder body 15, guide
sleeve 16, cylinder head nut 17, dust cover 18, tighten the nut 19, connecting fork
OUR WORKSHOP
OUR SALES TEAM
FAQ:
Q:Are you trading company or manufacture ?
A:We are real manufacture
Q:How long is your delivery time?
A:Generally it is 20-30days if the goods are in stock. or it is 30-40days if the goods are not in stock,it is
according to order quantity.
Q:What is your payment term?
A:Payment <=2000USD,100% in advance. Payment >=2000USD,30%T/T in advance,balance before shippment. or By Irrevocable L/C at sight.
Q:Do you provide samples? is it free or extra?
A:Yes,we could offer the sample with cost price or free charge, but do not pay the cost of freight.
If you have another question,pls feel free to contact us as below:
X-ING linear actuator co.,limited.
Commercial Manager: Jennifer Yang
villeindustry.en.made-in-china.com
Thanks for choosing X-ING as your reliable partner and please
trust both of us will create a brilliant future!
){kind=link}