Dg Push Rod with Electric Motor, Cylinder Pusher

• Customization: Available
• Certification: FCC, CCC, RoHS, ISO, CE
• IP Rating: IP54
• Model NO.: DG
• Limit Switch: Built-in
• Max Thrust: 63000kgf, Customized
• Standard Stroke: Customized
• Voltage: Customized, 12V 36V 48V 110V 220V 380V 400V
• Motor: Asynchronous Motor
• Transport Package: Wooden Case
• Specification: To be checked
• Trademark: X-ing
• Origin: China
• HS Code: 8
• Production Capacity: 1000

Product Description

Introduction:
The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs
reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload
protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,
chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,
with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient
installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of
hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in
the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.

Our company produced the DT type, HDG ,HDI series of electric putt (electric cylinder). Push (pull) force from
0.25KN to 50KN; push and pull stroke speed were 25mm / s, 42mm / s, 84mm / s. Is a smooth and accurate
action, reliable performance, and has built-in overload protection of the mechanical rotation device. In a very
wide range of areas can replace or replace the cylinder, the cylinder, especially in high temperature, fire,
explosion-proof, pollution-free environmental conditions, is an indispensable supporting equipment.
The series, the specifications of the push and pull stroke size or speed (0-100mm / s) can be selected by the
user.
To facilitate automatic control or to achieve a special trajectory, according to user requirements, can be
configured DC, frequency, step, speed and other special motor to meet the total control requirements.
Products are widely used in electricity, machinery, metallurgy, transportation, coal, chemicals, food processing
and other departments. 

Technical specification:

Model#	Push force	Stroke	Speed	L1	L2	LC	d1	d2	d3	d4	d5	d6	A	B	C	D	E
	(T)	mm	mm/s
DG4T	4	200-1600	1--25	600	120	350	200	140	108	75	35	35	168	40	40	45	40
DG6T	6	200-1600	1--22	650	120	350	200	140	108	75	35	35	168	40	40	45	40
DG8T	8	300-2000	1--22	740	130	450	260	190	140	100	45	45	200	45	50	60	52
DG10T	10	300-2000	1--22	790	130	450	260	190	140	100	45	45	200	45	50	60	52
DG15T	15	300-2200	1--20	990	130	380	340	340	180	135	60	55	364	50	55	85	60
DG20T	20	300-2200	1--20	990	130	380	340	340	180	135	60	55	364	50	55	85	60
DG25T	25	300-2200	1--16	1060	130	380	340	340	180	135	60	55	364	50	55	85	60
DG35T	35	300-2500	1--22	1470	145	592	410	410	219	140	65	70	440	52	60	90	70
DG45T	45	300-2500	1--22	1550	145	592	410	410	219	140	65	70	440	52	60	90	70
DG63T	63	300-2600	1--14	1700	155	773	530	530	273	195	80	90	560	68	70	106	95

OUR WORKSHOP


OUR SALES TEAM


Thanks for choosing X-ING as your reliable partner and please
trust both of us will create a brilliant future!