D75 Belt Conveyor Series
Introduction:
Belt conveyor, also called rubber belt conveyor, has main features of large capacity, simple structure, easy main
tenance, standard parts, etc. It can be used both individually and multiply or combined with other transportation
equipment, horizontal or inclined. It is widely used in mining, metallurgy, coal and other fields.
TD75 series belt conveyor is a Long-distance conveying machine that it is used to convey bulk materials or
packaged materials in the departments of electricity plant ,chemical, building materials, port and light industrial
etc. According to the requirements of conveying technology, it can be single conveying, also can be multiple
conveying . According to The installation location,it can be horizontal or inclined conveyor systems with other
conveyors
According national standard for design and manufacturing,the TD75 conveyor is working temperature is from-
25°--1000°."Different temperature,Different belt " Various belts includes: EP conveyor belt,NN conveyor belt,
High temperature resistant conveyor belt, Cold resistant conveyor belt,Flame retardant conveyor belt ,Steel
cord conveyor belt, etc. Accordancing with height of the conveying, material type ,capacity, ength of conveying
, Users can calculate and then determine the conveyor belt's width ,thickness of canvas and layers of duct tape
With simple structure, low cost, general components, convenient maintenance, TD 75 conveyor become a
popular conveyor which can satisfy general conveying capacity. A single or multiple conveyors together with
other conveying equipment can form horizontal or inclined conveying system according to demand.
Belt conveyor system principle:
Belt conveyor is composed by frame, belt, roller, tensioning device, transmission device, etc. The frame adopts
high quality steel for connection, a certain angle inclined plane is formed because of the different heights of
front and rear legs. The machine frame is fixed by belt roller and carrying roller which are used to drive and
support the conveying belt. There are two driving ways: geared motor driving and electric roller driving
Technical Characteristics
⊙ The belt width can be divided into 500mm 650mm 800mm 1000mm 1200mm 1400mm
⊙ Driving power: 1.5-200Kw, total is 12 types
⊙ Belt speed: 0.8,1.0,1.25,1.6,2.0,2.5,3.15,4.0m/s
⊙ Conveying capacity: See table (1) (Material capacity r=1.0T/M, conveyor angle of inclination β≤60,Material
stacking Angle=300)
⊙ The maximum inclination angle, see table (2) (The allowance maximum angle is 80% value of the table when
conveying downward)
Table 1
| Section shape |
Belt speed(m/s) |
B(mm)Belt width |
| 500 |
650 |
800 |
1000 |
1200 |
1400 |
| Q(t/h)Conveying amount |
| Trough type |
0.8 |
78 |
131 |
|
|
|
|
| 1.0 |
97 |
164 |
278 |
435 |
655 |
891 |
| 1.25 |
122 |
206 |
348 |
544 |
819 |
1115 |
| 1.6 |
156 |
264 |
455 |
696 |
1048 |
1427 |
| 2.0 |
191 |
323 |
546 |
853 |
1284 |
1748 |
| 2.5 |
232 |
391 |
661 |
1033 |
1556 |
2118 |
| 3.15 |
|
|
824 |
1233 |
1858 |
2528 |
| 4.0 |
|
|
|
|
1101 |
2996 |
| Flat type |
0.8 |
41 |
67 |
118 |
|
|
|
| 1.0 |
52 |
88 |
147 |
230 |
345 |
469 |
| 1.25 |
66 |
110 |
184 |
288 |
432 |
588 |
| 1.6 |
84 |
142 |
230 |
368 |
553 |
753 |
| 2.0 |
103 |
174 |
289 |
451 |
677 |
922 |
| 2.5 |
125 |
211 |
350 |
546 |
821 |
1117 |
Table 2
| Material name |
β |
Material name |
β |
Material name |
β |
| Lump coal |
18° |
20~40mm Kerogen shale |
20° |
Wet sand |
23° |
| Raw coal |
20° |
0~1200mm Kerogen shale |
22° |
Salt |
20° |
| Coal powder, products after whased |
21° |
Dry clay |
20° |
Molding sand |
24° |
| Coke after screening |
17° |
Wet soil |
20-23° |
Waste sand |
20° |
| 0~25mm coke |
18° |
Wet fine ore(water content 120%) |
20° |
Stone block before screening |
18° |
| 0~3mm coke |
20° |
Dry fine ore |
18° |
Cement |
20° |
| 0~350mm ore |
16° |
Limestone after screening |
12° |
Lump clay |
15-18° |
| 0~120mm ore |
18° |
Dry sand |
15° |
Powder dry clay |
22° |
| 0~60mm ore |
120° |
Sand with gravel |
18-20° |
|
|
| 40~80mm ore |
18° |
Sand from quarry |
20° |
|
|
2.Main Features Of HC TD75-B500 Series Flat Rubber Belt Conveyor Price
1. Big capacity
2. Low cost
3. Longer using time
4. Competitive price
5. Suitable for many kinds of materials
Main Belt conveyor features:
1. Large conveying capacity and longer conveying distance, up to 20km or longer
2. Can conveyor various kinds of bulk material and itemized goods with bulk density of 0.5~2.5t/m³
3. Can adopt combined conveying mode of convex curved segment,concave curved segment or straightline
segment.
4. According to different transportation request, it can be single used or multiple combined using, also can be
used together with other equipments to organize a horizontal or declining conveying system.
5. It can be used between -25ºC~+60ºC working environment, temperature of conveying material under 80ºC
with high adaptability.
Belt conveyor production site:
1 Standard: JIS, DIN, CEMA, GB and ISO.
2 Raw material: Q235 carbon steel pipe(GB), which equals to DIN S235JR.
Idler Diameter: 60-219mm; Idler Length: 150-2500mm; Thickness: 1.0-4.5mm.
3 Shaft: low carbon steel(GB), which equals to DIN C45.
Diameter: 20,25,30,40,45mm; Shaft end type: TD75,DTII.
4 Bearing: SFK, NSK, HRB, or per customer's request.
5 Welding: automatic double-gun girth welding for both ends.
6 Painting: ordinary painting, electrostatic spraying painting, hot DIP galvanized.
7 Certificate: ISO9001:2008, SGS.
Belt conveyor application:
1) Harbor & port,
2) Chemical industry,
3) Metal & metallurgy,
4) Coal, mining, quarry etc,
5) Electric power,
6) Fertilizer, salt, sugar and pulp paper etc,
6) Building material and other industries.
OUR WORKSHOP
OUR SALES TEAM
Our Service
1.Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any
needs for your new product or wish to make further improvements, we are here to offer our support.
2.Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing Fashioning
→Cleaning→ Assembly→Packing→Shipping
3.Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your
need.
4.Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the
market.
5.Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.
6.Certification
Should your products require testing and certification to comply with international standards, we can arrange
this with independent, fully recognized testing companies such as SGS, Intertec, Bureau Veritas, Lloyd's
Register or the testing company of your choice.
Thanks for choosing X-ING as your reliable partner and please
trust both of us will create a brilliant future!
){kind=link}